Filter
Top Products
4
Cisco Connected Grid Modules for CGR 1000 Series—WiMAX Installation and Configuration Guide
OL-26236-03
Features
Features
Cisco Connected Grid Modules for CGR 1000 Series—WiMAX offers the following key features:
Table 2 Feature Information for WiMAX module
Feature Description
WiMAX technology standard IEEE 802.16e
Bands 1.4 GHz band: 1390 to 1510 MGhz (CGM-WIMAX-1.4GHz)
1.8 GHz band: 1800 to 1830 MHz (CGM-WIMAX-1.8GHz)
2.3 GHz bands: 2300 to 2360 MHz (CGM-WIMAX-2.3GHz)
3.65 GHz bands: 3300 to 3800 MHz (CGM-WIMAX-3.65GHz)
Note The WiMAX module is capable of operation in the listed
frequency band and its hardware can be configured for
operation in one band at a time by way of circuit board
assembly option.
Mobile Broadband Wireless
Access System
IEEE 802.16e-2009
Two antenna ports 50 ohms impedance, QMA connector (jack).
Operation mode TDD (Time Division Duplex)
Channel bandwidth 3.5, 5.0, 7.0, and 10 MHz
Number of transmitters 2
Number of receivers 2 (MRC and CL-MIMO)
Maximum transmit power 23 dBm per transmit stream, 2 streams
Security
• PkmV2
• Authentication: EAP-TLS and EAP-TTLS
• Digital certificate
Data rates
• The actual throughput rates depends on many different factors,
but the theoretical rates for the technologies follows:
• Mobile WiMAX technology to support peak DL data rates up to
63 Mbps per sector and peak UL data rates up to 28 Mbps per
sector in a 10 MHz channel.
Authentication Hash-based Message Authentication Code (HMAC) and
Cipher-based MAC (CMAC) support.
Module management Enables you to access modem software and hardware information,
radio and network status, and data profile information by using Cisco
commands.
Antenna Multiple antenna and cable options:
• Separate dual antennas or dual-polarized antenna
• Chassis integrated and outdoor externally mounted antennas
• Radio Frequency Ultra-Low Loss (RF-ULL) coaxial cable