26
Cisco Connected Grid Modules for CGR 1000 Series—WiMAX Installation and Configuration Guide
OL-26236-03
Additional References
• 3C9854—Manufacturer’s code
Step 2 Convert manufacturer’s code to decimal as shown:
• Hexadecimal 0x60 equals decimal 96.
• If the decimal value is two digits only, prepend it with a zero to expand it to three digits.
• Manufacturer’s code is thus 096.
Step 3 Convert the serial number to decimal, as shown in the example below:
• Hexadecimal 0x3C9854 equals decimal 3971156.
• If decimal value is less than 8 digits, add enough zeros to make it into an 8 digit number.
• Serial number is thus 03971156.
Step 4 To obtain complete 11-digit decimal ESN notation, combine manufacturer code and serial number:
• Manufacturer code: 096
• Serial #: 03971156
• Decimal ESN: 09603971156
Additional References
Consult the following resources for related information about the WiMAX module or for technical
assistance:
• Hardware Overview and Installation Documents, page 26
• Supported Cisco Antennas and Accessories Documents, page 26
• Cisco System Software Commands Documents, page 27
• Regulatory, Compliance, and Safety Information, page 27
Hardware Overview and Installation Documents
• Cisco Connected Grid Modules
http://www.cisco.com/en/US/products/ps10984/prod_module_series_home.html
• Cisco CGR 1240 Hardware Installation Guide
http://www.cisco.com/en/US/docs/routers/connectedgrid/cgr1000/hardware/cgr1240/installation.html
•
Cisco 1000 Series Connected Grid Routers
http://www.cisco.com/en/US/partner/products/ps12256/tsd_products_support_series_home.html
Supported Cisco Antennas and Accessories Documents
• Connected Grid Antennas Installation Guide
http://www.cisco.com/en/US/docs/routers/connectedgrid/antennas/installing/cg_antenna_install_guide.html
• Lightning Arrestor for the Cisco 1240 Connected Grid Router