Filter
Top Products
4-22
Cisco ONS 15454 SDH Procedure Guide, R4.6
January 2004
Chapter 4 Turn Up Node
DLP-D68 Provision the IIOP Listener Port on the CTC Computer
DLP-D68 Provision the IIOP Listener Port on the CTC Computer
Step 1 In node view, from the Edit menu, choose Preferences.
Step 2 In the Preferences dialog box, click the Firewall tab.
Step 3 In the CTC CORBA (IIOP) Listener Port area, choose a listener port option:
• Default - Variable—Use to connect to ONS 15454 SDH nodes from within a firewall or if no firewall
is used (default).
• Standard Constant—Use Port 683, the CORBA default port number.
• Other Constant—If Port 683 is not used, enter the IIOP port defined by your administrator.
Step 4 Click Apply. A warning appears telling you that the port change will apply during the next CTC login.
Step 5 Click OK.
Step 6 In the Preferences dialog box, click OK.
Step 7 To access the ONS 15454 SDH using the IIOP port, log out of CTC (from the File menu, select Exit and
log back in).
Step 8 Return to your originating procedure (NTP).
NTP-D28 Set Up Timing
Note If the ONS 15454 is a DWDM or hybrid (TDM and DWDM) node, do not complete this procedure if you
are provisioning the node for line timing with an OSCM or OSC-CSM card as a timing reference. The
OSCM and OSC-CSM are not available for selection on the Timing subtab until you complete the
“NTP-D290 Install the DWDM or Hybrid Node Cards” procedure on page 5-3. If the DWDM or hybrid
node timing is external, that is, timing is derived from a BITS source wired to the backplane, you can
complete this procedure now.
Purpose This task selects the IIOP listener port on CTC.
Tools/Equipment IIOP listener port number from LAN or firewall administrator.
Prerequisite Procedures DLP-D60 Log into CTC, page 3-24
Required/As Needed Required only if the computer running CTC resides behind a firewall.
Onsite/Remote Onsite or remote
Security Level Provisioning or higher
Purpose This procedure provisions the ONS 15454 SDH timing.
Tools/Equipment None
Prerequisite Procedures NTP-D24 Verify Card Installation, page 4-2
Required/As Needed Required
Onsite/Remote Onsite or remote
Security Level Provisioning or higher