Filter
Top Products
Configure Basic Settings
4021194 Rev A 25
Configure Basic Settings
This section describes how to configure Basic settings for the residential gateway.
Setting Configuration Options
Use the Setup page to access the various configuration options for the residential
gateway. Detailed descriptions of each configuration option follow later in this
guide.
Important: After you access the WebWizard by typing the 192.168.0.1 IP address into
your web browser while the gateway is online, an authentication window similar to
the following window opens:
Enter your password; then, click OK to continue to the Setup page.
First Time Users
The gateway ships from the factory without a factory-assigned or default password.
Leave the user name and the password fields blank. Then click OK to be directed to
the Password Settings page.
Note: You will be prompted to set up a password. We highly recommend that you
set up a password to prevent unauthorized access to the settings of the gateway. If
you choose not to enter a password, this page will appear each time you access the
setup pages. See Configuring Your Password Settings (on page 30) for assistance in
setting up your password. If you choose not to use password security, click the
Setup tab at the top of the Password Settings page to continue.