Filter
Top Products
Chapter 3 Configuring the DOCSIS Residential Gateway
60 4021194 Rev A
Field Name
Description
Subnet
Allows you to enter Subnet information based on the selected Address
group type as follows:
For IP subnet, enter the subnet
For single IP address, enter only the specific IP address
For IP address range, enter the starting and ending IP addresses
Mask
Allows you to enter Mask information based on the selected Address
group type as follows:
For IP subnet, enter the subnet mask
For single IP address, enter only the specific IP address in the
Subnet field. Leave this field blank.
For IP address range, enter the starting IP and ending IP addresses
Identity type
Allows you to select the local Identity type from one of the following
options:
WAN IP address of the router (default)
User-specified IP address
Fully qualified domain name (FQDN)
Email address
This is the identity that the far endpoint will use for identification of the
VPN termination point. The remote VPN endpoint on the other end of
the tunnel should match these settings for its remote endpoint settings
Identity
Allows you to enter the identity string after you have selected the
identity type using one of the following formats:
For IP address mode use the format xxx.xxx.xxx.xxx
For FQDN use the format "yourdomain.com"
For email address use the format "yourname@yourdomain.com"
The remote VPN endpoint on the other end of the tunnel should match
these settings for its remote endpoint settings