Filter
Top Products
B-112
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Appendix B Error Messages
Cisco MGM Server Audit Messages
Audit Message AUD-3056: Processing NE time offset for string. New offset value
is value.
Audit Message AUD-3057: Data format error while obtaining PM data for string for
interval string.
Audit Message AUD-3060: PM Comm Session is null for NE_name.
Audit Message AUD-3062: Exception during PM collection for NE_name.
Audit Message AUD-3063: Cannot write PM data for NE_name.
Audit Message AUD-3064: Cannot write PM data for NE_name, data collected was
blank.
Audit Message AUD-3065: Partial replies not valid, PM collection failed for
NE_name.
Audit Message AUD-4201: Auto Backup Job Status has: {Succeeded | Failed}.
Explanation
This message informs you of the status of the automatic daily backup for each NE.
Audit Message AUD-4205: {Activate | Revert} Command Status has:
{Succeeded | Failed}.
Recommended Action
If the command status is Failed, check the Error Log for EID-4205 for a
detailed explanation of the failure.
Audit Message AUD-5000: During circuit creation.
Recommended Action
Informational message during circuit creation. No action is required.
Audit Message AUD-5001: Submit check request for deletion.
Recommended Action
Informational message during circuit creation. No action is required.
Audit Message AUD-5001: The MGM Service service name is being started.
Recommended Action
The service is being launched, but might not have started up completely. Do
not perform a service Stop operation on this service again until you see the AUD-5003 message.
Audit Message AUD-5002: The MGM Service service name is being stopped.
Recommended Action
The service is being stopped, but might not have shut down completely. Do not
perform a service Start operation on this service again until you see the AUD-5004 message.