Filter
Top Products
B-51
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Appendix B Error Messages
Cisco MGM Client Error and Warning Messages
Error Message EID-878: Failed to Reset General attributes of L2 Service.
Recommended Action
Close the modify L2 service window and try again.
Error Message EID-879: Failed to Reset QoS values for L2 Service.
Recommended Action
Close the modify L2 service window and try again.
Error Message EID-880: Failed to Reset Enable/Disable value for the drops in the L2
Service.
Recommended Action
Close the modify L2 service window and try again.
Error Message EID-883: L2 Topology is undergoing Resync. Please wait until the L2
Topology Resync is completed.
Recommended Action
Wait until the topology resync has completed before starting the operation.
Error Message EID-884: L2 Topology is in Incomplete state.
Recommended Action
Selected topology is incomplete. Complete the topology by creating missing
circuits. Try the operation again after completing the topology.
Error Message EID-885: There are no Mcards in the topology.
Recommended Action
Add the ML-series cards to the topology and wait until the topology is
completed. Wait until the topology resynchronization status becomes complete. If the problem
persists, contact Cisco technical support.
Error Message EID-902: Failed to set the circuit attributes.
Recommended Action
Cisco MGM enforces the uniqueness of the circuit ID. Change the circuit name
and retry.
Error Message EID-903: Circuit Name is a mandatory field. Enter a valid circuit name
with 1 or more characters and retry.
Recommended Action
Enter a circuit name.
Error Message EID-904: Failed to set the circuit end points for circuit creation.
Recommended Action
The server service is not ready. Wait several minutes and try again.
Error Message EID-905: Source is not fully specified.
Recommended Action
Specify the source NE and connection termination points (CTPs).