Filter
Top Products
B-45
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
Appendix B Error Messages
Cisco MGM Client Error and Warning Messages
Error Message EID-722: Circuits must be created between two nodes that are in service
and available. Recreate the circuit.
Recommended Action
Recreate the circuit.
Error Message EID-723: Links cannot be created between two offview nodes. Recreate
the link.
Recommended Action
Recreate the link.
Error Message EID-724: Exception occurred while launching the Circuit Table.
Recommended Action
An error occurred while launching the Circuit Table. Try to relaunch the
Circuit Table.
Error Message EID-725: Enter a valid link name with 1 to 256 characters.
Recommended Action
Enter a valid link name that contains 1 to 256 characters.
Error Message EID-726: Enter a valid link description with 1 to 256 characters.
Recommended Action
Enter a valid link description that contains 1 to 256 characters.
Error Message EID-727: Enter a valid link name with 1 to 64 characters and a link
description with 1 to 256 characters.
Recommended Action
Enter a valid link name and link description.
Error Message EID-728: There is no support for this model yet.
Recommended Action
The network element software version is not supported. Contact Cisco’s
Technical Support for more information.
Error Message EID-731: Action was not completed or was partially completed.
Recommended Action
A link already exists with the same name. Create a link with a unique name.
Error Message EID-732: Source and destination nodes cannot be the same. Choose a
different destination node.
Recommended Action
Choose a different destination node.