Filter
Top Products
4-21
Cisco IP Solution Center Integrated VPN Management Suite Security User Guide, 3.2
OL-5532-02
Chapter 4 Remote Access VPN Services
Creating Remote Access VPN Policies
Step 2 Follow the instructions in Table 4-9 to enter values for each day of the week.
Step 3 Click Next to continue to the VPN 3000 L2TP page as described in the “Defining the VPN 3000 L2TP
Parameters” section on page 4-21.
Defining the VPN 3000 L2TP Parameters
L2TP provides tunneling of PPP. An L2TP session defines the communications transactions between the
LAC and the LNS that support tunneling of a single PPP connection. For further information on
VPN 3000 L2TP parameters, refer to the VPN 3000 online help.
If you selected the L2TP over IPsec option in the Tunneling Protocols field, you must set values for the
parameters in this section.
Step 1 The Remote Access VPN Policy – VPN 3000 L2TP Editor page appears as shown in Figure 4-21.
Table 4-9 Remote Access VPN Policy – Access Hours Fields
Field Name Type Instructions
Name text box Enter a name to identify the access hours assigned to this group.
Control drop-down
list
There are two control options:
• during – Allow access during the hours in the specified range (default).
• except – Allow access except during the hours in the specified range.
Start Time text box in
time format
Enter starting time of the access time range.
End Time text box in
time format
Enter ending time of the access time range.