Filter
Top Products
4-27
Cisco IP Solution Center Integrated VPN Management Suite Security User Guide, 3.2
OL-5532-02
Chapter 4 Remote Access VPN Services
Creating Remote Access VPN Service Requests
Remote Access
Policies
list Specify the remote access policy to use in this service request by clicking Select. The
Policy for Remote Access Service page appears as shown in Figure 4-26. Choose the
policy and click Select. You can select multiple remote access policies. Each Remote
Access Policy defines a user group, and using multiple remote access policies in the
same service request enables you to configure multiple user groups on the same CPE
device.
Figure 4-26 The Policy for Remote Access Service Page
AAA Servers list Specify the AAA server by clicking Select. The AAA Server for Remote Access
Service page appears as shown in Figure 4-27. Choose the AAA server and click
Select. You can select multiple AAA servers, for example, if you are using different
servers for authentication and accounting or to configure backup AAA servers.
(Optional) AAA Server interface – Specify an IP address of an interface to use for
all outgoing RADIUS packets. Choose the AAA server Interface and click Select.
Figure 4-27 The AAA Server for Remote Access Service Page
CPEs row Continue to Step 4 for instructions on how to add CPE devices to your service
request.
Table 4-11 IPsec Remote Access Service Editor Fields (continued)
Field Name Type Instructions