Filter
Top Products
3-4
PA-POS-1OC3 Single-Port Port Adapter Installation and Configuration Guide
OL-6514-04
Chapter 3 Removing and Installing the PA-POS-1OC3
Port Adapter Removal and Installation
Warning
Blank faceplates and cover panels serve three important functions: they prevent exposure to
hazardous voltages and currents inside the chassis; they contain electromagnetic interference (EMI)
that might disrupt other equipment; and they direct the flow of cooling air through the chassis. Do not
operate the system unless all cards, faceplates, front covers, and rear covers are in place.
Statement 1029
Port Adapter Removal and Installation
In this section, the illustrations that follow give step-by-step instructions on how to remove and install
port adapters in each of the following supported platforms:
• Cisco 7200 VXR Routers—Removing and Installing a Port Adapter, page 3-5
• Cisco 7201 Router—Removing and Installing a Port Adapter, page 3-6
• Cisco 7301 Router—Removing and Installing a Port Adapter, page 3-7
• Cisco 7304 PCI Port Adapter Carrier Card—Removing and Installing a Port Adapter, page 3-8
• Cisco 7401ASR Router—Removing and Installing a Port Adapter, page 3-10
• Cisco 7500 Series Routers—Removing and Installing a Port Adapter, page 3-11
• Cisco 7600 Series Router—Removing and Installing a Port Adapter, page 3-12
For cabling information see the “Connecting PA-POS-1OC3 Interface Cables” section on page 3-13.