Filter
Top Products
88
Route Switch Processor (RSP8) Installation and Configuration Guide
OL-4920-02
Obtaining Documentation
The config-reg 0x2102 command, with the hexadecimal value 0x2102, results in the following:
• Enables the system to boot the default boot ROM software if the Flash Disk-based image fails to
boot—hexadecimal value 0x2000
• Disables Break—hexadecimal value 0x0100
• Enables the image myfile as the default boot image—hexadecimal value 0x0002
Step 3 Press Ctrl-Z or type end to exit global configuration mode:
System(config)#
System(config)# end
System#
Step 4 Save the new configuration to NVRAM by using the copy running-config startup-config command as
follows:
System# copy running-config startup-config
Using Flash Memory
The Flash memory (PC Card) slots on the front panel of the RSP8 support PC Card-based Flash memory
media for your system. You can use this Flash memory to store and run IOS software images, or as a file
server for other routers to access as clients. The Flash memory media is either Flash memory cards or
Flash Disks.
Note A complete discussion of PC Card-based Flash memory is beyond the scope of this publication. For
detailed information on Flash memory cards, refer to Flash Memory Card Installation Instructions (Part
Number: DOC-782083=). Or, for detailed information on Flash Disk, refer to Using the Flash Disk (Part
Number DOC-785819=).
Obtaining Documentation
Cisco provides several ways to obtain documentation, technical assistance, and other technical
resources. These sections explain how to obtain technical information from Cisco Systems.
Cisco.com
You can access the most current Cisco documentation on the World Wide Web at this URL:
http://www.cisco.com/univercd/home/home.htm
You can access the Cisco website at this URL:
http://www.cisco.com
International Cisco websites can be accessed from this URL:
http://www.cisco.com/public/countries_languages.shtml