Filter
Top Products
47
3. Tighten the two captive panel screws on the front panel to secure the card to the chassis.
Removing a Blower Tray
To remove a blower tray, perform the following steps:
1. Unfasten the fan tray screws.
2. Pull the fan toward you until it completely disengages from the chassis.
3. Fasten a blanking panel to the empty chassis bay to ensure appropriate cooling.
The blanking panel is a flat sheet of metal with the same dimensions as the fan tray faceplate. It is
fastened in the same way as a fan module.
NOTE: Each fan module contains three fans for a total of six fans. The system requires at least two
fans to remain operational. In the event that one fan module fails, or you want to hot-swap the
module, it must be replaced within three minutes.