Filter
Top Products
4-2
Cisco SFS 7000P and SFS 7000D InfiniBand Server Switches Hardware Installation Guide
OL-10853-01
Chapter 4 Installing Field Replaceable Units
Installing a Power Supply Module
Installing a Power Supply Module
Warning
Hazardous voltage or energy is present on the backplane when the system is operating. Use caution
when servicing.
Statement 1034
Caution Never place your hand inside an empty module bay or anywhere inside the
Cisco SFS 7000P and SFS 7000D Server Switches.
Caution Unused module bays always should have a switch filler panel over the bay to ensure proper safety,
ventilation, and cooling.
To insert a power supply module, follow these steps:
Step 1 Ground yourself appropriately.
Step 2 Remove the filler panel from the power supply bay with a number 1 Phillips or a slotted screwdriver, if
it is still in place. (See Figure 4-1.)
Figure 4-1 Removing a Filler Panel from the Switch
180916