Filter
Top Products
Configuring Secure Domain Routers on Cisco IOS XR Software
How to Configure Secure Domain Routers
SMC-158
Cisco IOS XR System Management Configuration Guide
5. end
or
commit
6. Connect a terminal to the console port of the non-owner SDR DSDRSC.
7. Log in to the non-owner SDR using admin plane authentication:
Username:username@admin
Password:xxxx
8. configure
9. username username
10. secret password
11. group root-lr
12. end
or
commit
13. exit
14. Username:username
Password:xxxx
15. Provide the new username and password to the user.
16. Disable admin plane authentication as described in the “Disabling Remote Login for SDRs” section
on page SMC-161.
DETAILED STEPS
Command or Action Purpose
Step 1
Connect a terminal to the console port of the DSC
(DSDRSC of the owner SDR).
Note If an IP address has not yet been assigned to the
Management Ethernet port, you must connect a
terminal directly to the console port of the DSC.
Step 2
admin
Example:
RP/0/RP0/CPU0:router# admin
Enters Administration EXEC mode.
Step 3
configure
Example:
RP/0/RP0/CPU0:router(admin)# configure
Enters Administration configuration mode.