Filter
Top Products
Verifying Bridging
Bridging and Routing Features for the Cisco uBR924 Cable Access Router 17
When the cable interface comes up, the IP address and downstream channel are configured
automatically.
Note To configure multiple PCs, repeat Steps 4 through 7 above for each additional PC. You can
connect a maximum of three PCs to the Cisco uBR924 cable access router in a bridging application.
Verifying Bridging
To verify that routing has been disabled on all interfaces and that bridging has been reenabled, enter the show
startup-config command from privileged EXEC mode:
uBR924# show startup-config
Building configuration...
Current configuration:
!
version 12.0
service config
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname uBR924
!
clock timezone - 4
ip subnet-zero
no ip routing
!
!
voice-port 0
!
!
voice-port 1
!
!
interface Ethernet0
no ip address
no ip directed-broadcast
no ip route-cache
bridge-group 59
bridge-group 59 spanning-disabled
!
18
uBR924(config-line)#line vty 0 4
Identify the last line in a contiguous group of virtual
terminals you want to configure.
19
uBR924(config-line)#Ctrl-z
uBR924#copy running-config startup-config
Building configuration...
Return to privileged EXEC mode.
Save the configuration to nonvolatile RAM so that it
won’t be lost in the event of a reset, power cycle, or power
outage.
Step Command Purpose