Filter
Top Products
show interfaces cable-modem
Bridging and Routing Features for the Cisco uBR924 Cable Access Router 45
show interfaces cable-modem
To display information about the Cisco uBR924 cable access router’s cable interface, enter the show
interfaces cable-modem command from either user EXEC mode or privileged EXEC mode.
show interfaces cable-modem number [accounting | counters | crb | irb | type]
Syntax Description
Defaults
No default behavior or values.
Command Modes
User EXEC or privileged EXEC
Command History
Usage Guidelines
When this command is entered without a keyword, general information about the cable interface is
displayed.
number Cable access router interface number.
accounting (Optional) Displays the number of packets of each protocol type that has been sent
through the cable access router interface.
counters (Optional) Shows MIB counters on the cable interface.
crb (Optional) Displays concurrent routing and bridging information for each interface
that has been configured for routing or bridging. This option does not really apply to
the Cisco uBR924; it is included because it is part of the subsystem that provides
DOCSIS-compliant bridging. For more information, refer to the
Bridging and IBM
Networking Command Reference
.
irb (Optional) Displays integrated routing and bridging information for each interface
that has been configured for routing or bridging. This option does not really apply to
the Cisco uBR924; it is included because it is part of the subsystem that provides
DOCSIS-compliant bridging. For more information, refer to the
Bridging and IBM
Networking Command Reference
.
type (Optional) Designed to display information about virtual LANs associated with the
interface; however, this option is not supported on the Cisco uBR924.
Release Modification
11.3 NA This command was first introduced.