Filter
Top Products
Simple Network Management Protocol
Users
Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE 140
8
• Write Views—The write access to MIBs for the group, which can be one of
these options:
- write-all—The group can create, alter, and delete MIBs.
- write-none—The group cannot create, alter, or delete MIBs.
• Read Views—The read access to MIBs for the group:
- view-all—The group is allowed to view and read all MIBs.
- view-none—The group cannot view or read MIBs.
STEP 5 Click Save. The group is added to the SNMPv3 Groups list and your changes are
saved to the Startup Configuration.
NOTE To remove a group, select the group in the list and click Delete.
Users
You can use the SNMP Users page to define users, associate a security level to
each user, and configure security keys per-user.
Each user is mapped to an SNMPv3 group, either from the predefined or user-
defined groups, and, optionally, is configured for authentication and encryption.
For authentication, only the MD5 type is supported. For encryption, only the DES
type is supported. There are no default SNMPv3 users on the WAP device, and
you can add up to eight users.
To a d d S N M P u s e r s :
STEP 1 Select SNMP > Users in the navigation pane.
STEP 2 Click Add to create a new row in the SNMPv3 Users table.
STEP 3 Check the box in the new row and click Edit.
STEP 4 Configure the parameters:
• User Name—A name that identifies the SNMPv3 user. User names can
contain up to 32 alphanumeric characters.