Cisco Systems WIC-1AM-V2 Network Router User Manual


 
Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WAN Interface Card
upgrade modem firmware
21
Cisco IOS Release 12.3(14)T
upgrade modem firmware
To upgrade the modem firmware, use the upgrade modem firmware command in global configuration
mode.
upgrade modem firmware [all | slot slot | wic nm-slot/wic-slot] file source
Syntax Description
Defaults No default behavior or values.
Command Modes Global configuration mode.
Command History
Usage Guidelines The source for the modem firmware file can be any of the following:
all Select all the modems in the router that are supported by the modem
firmware file.
slot Select the modem in the specified router slot that are supported by the
modem firmware file.
slot Number of the slot selected.
wic Select the modems in the specified router slot/wic_slot that are supported by
the modem firmware file.
nm-slot Number of the slot where the network module is located.
wic-slot Number of the slot where the WIC is located.
file Obtains the firmware information from the file named as source.
source Name of the file with the firmware.
Release Modification
12.3(13) This command was introduced.
cns: Firmware filename
flash: Firmware filename
ftp: Firmware filename
null: Firmware filename
nvram: Firmware filename
rcp: Firmware filename
system: Firmware filename
tftp: Firmware filename
xmodem: Firmware filename
ymodem: Firmware filename