Filter
Top Products
Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WAN Interface Card
upgrade modem firmware
22
Cisco IOS Release 12.3(14)T
It is best to copy the modem firmware file to Flash: or Slot0: before trying to upgrade the modems. After
selecting the source, specify the filename. For example,
tftp://192.168.100.26/mj-F48A-1824M-4M-Rev-2-bundle-image.bin
If a modem has a call up, the call will be torn down (the modems selected in the upgrade command, are
hardware reset before starting the download). A series of dots are printed (one per second) until the
selected modems have been upgraded. The router must not be powered cycled during the upgrade
command.
Examples The following example shows output of the upgrade modem firmware all command with a 1-port
WIC-1AM-V2 in 0/1 (slot/wic-slot) and a 2-port WIC-2AM-V2 in 1/0 (slot/wic-slot).:
Router# $em firmware all file flash:mj-F48A-1824M-4M-Rev-2-bundle-image.bin
Verifying the modem firmware bundle - Passed
Decompressing modem firmware image - Done
Loading /mj-F48A-1824M-4M-Rev-2-bundle-image.bin from 192.188.100.26 (via
FastEthernet0/0): !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[OK - 282816 bytes]
Verifying the modem firmware bundle - Passed
Decompressing modem firmware image - Done
TTY1: Upgrading modem firmware
TTY33: Upgrading modem firmware
TTY34: Upgrading modem firmware
Downloading modem firmware. Please Wait
..........................................................................................
..............................
TTY1: WIC-AM: Modem firmware download finished...
TTY34: WIC-AM: Modem firmware download finished.......
TTY33: WIC-AM: Modem firmware download finished...
Finished upgrading modem firmware.
Related Commands Command Description
clear modem Resets the hardware for a manageable modem.