Filter
Top Products
Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WAN Interface Card
How to Configure the Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WIC
5
Cisco IOS Release 12.3(14)T
How to Configure the Cisco WIC-1AM-V2 and WIC-2AM-V2
Analog Modem WIC
To configure the Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WIC, complete the following
tasks:
• Configuring the Asynchronous Interface, page 5
• Configuring the Country Code, page 7
• Upgrading the Modem Firmware, page 11
• Verifying the Modem Firmware Upgrade, page 13
Configuring the Asynchronous Interface
Complete the following steps to configure the asynchronous interface on the Cisco WIC-1AM-V2 and
WIC-2AM-V2 Analog Modem WIC.
SUMMARY STEPS
1. enable
2. configure terminal
3. interface async number
4. ip unnumbered type number
5. encapsulation ppp
6. dialer in-band [no-parity | odd-parity]
7. dialer string number
8. dialer-group group-number
9. async mode interactive
10. peer default ip address pool poolname
DETAILED STEPS
Command or Action Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
• Enter your password if prompted.
Step 2
configure terminal
Example:
Router# configure terminal
Enters global configuration mode.