Filter
Top Products
CBM-910 User’s Manual
CITIZEN
10
4.4 Setting Paper
(1) Remove the printer cover.
(2) Make sure that the end of the paper is straight or incline as indicated in the diagram.
(3) Fix the core by inserting the printing paper with the paper holder turned down as the arrows indicate below.
(4) Insert paper into the slot of the printer mechanism.
(5) Following turning-on of the power switch, as pressing the LF switch, take out printing paper by 5 to 6 cm from the
printer mechanism. As passing the paper through paper outlet, mount the printer cover.
(NOTE)
If the paper is held aslant in the paper feed or the paper discharge side, it may cause paper jamming. On occurrence of
the above, immediately cut off power and slowly pull out remaining paper upright.