Filter
Top Products
CBM-910 User’s Manual
CITIZEN
12
4.6 Paper End. Mechanical Alarm
(1) Paper end
Printing paper shortage is detected and informed with SEL lamp blinking at 0.5 second intervals, when printing is
suspended. At this time, power supply to the motor and printing solenoid stops with BUSY signals output in the host
computer.
To recover from Paper End state, set new paper and press SEL switch twice. LF functions normally.
Press SEL switch twice to print out input buffer data of one line at the end of the paper without changing rolls.
(2) Mechanical alarm
On occurrence of locked motor, any kind of trouble in the mechanism is suspected. Power supply to the motor and
printing solenoid is stopped and BUSY signals are output in the host computer. SEL lamp then blinks at 1/4 second
intervals. To recover from alarm state, eliminate the trouble cause and press SEL switch twice.
If it is in the course of printing, printing starts at the beginning of the interrupted line. (Content of the input buffer is
still held.) However, this does not apply to a case if the power has been cut due to a severe trouble.