Filter
Top Products
— 13 —
ENGLISH
(11mm) (40mm)
2.5 Sensor Position and Cutter Position
Manual cutting
position
Auto cutting position
Top print line
Paper feed direction
CAUTION
• Observe the following rules on the auto cutter usage:
• Every cut paper should be no less than 10 mm in length. Thin paper strips can cause
paper to jam.
• When cutting a label roll, be sure to cut the base sheet. Never cut labels (tags).
Approx. 27
Approx. 13
Approx. 17
Label gap sensor
Unit: mm
Paper end sensor