Filter
Top Products
CBM-920 User’s Manual
12 CITIZEN
3.2 Explanation of Each Part
1 Interface Connector Connected to various hosts via cables. On connection, confirm beforehand that power
supply of the host and the printer are OFF. The power cable, also, is held in this
connector.
Make sure to connect FG terminal with an earth. Do not connect this terminal with the
lines except for an earth.
2 Feed Switch With this switch pressed, paper is fed. Use this to insert paper and to put space. With
pushing this switch, power is turned ON, self -print function is conducted.
3 Paper Lamp Lights up when paper has become scarce or run out.
(Only when Paper Near End/Paper End function has been set.)
Put out when paper has been inserted.
4 Knob Use this to set paper or to open the front cover on changing of paper.
5 Front Cover Open/close this on setting or changing of paper.
6 Ribbon Cover Open/close this to change ink ribbon.
This opens when the left side of the front face is pulled forward.
7 Mounting bracket Use this to fix the main body to a rack, etc.
8 Paper Holder Paper setting section.
Placing paper from the insertion port, set paper.