Filter
Top Products
CBM-920 User’s Manual
31 CITIZEN
7. DIP SWITCH SETTING
DS1
Switch No. Function OFF ON Factory Setting
*
*
1
2
3
International character See the table below
*
4 CRfunction CRignored CR+LF OFF
5 Character direction Erecting character Inverted character OFF
6 Paper near end function Enabled Disabled OFF
7 Auto loading function Enabled Disabled OFF
8 Hex. Dump mode Disabled Enabled OFF
* changes in setting according to destination.
Hex. Dump mode is not available with 24 columns version.
International Character Setting
Switch No.
U.S France Germany U.K Denmark Italy Spain Japan
1 OFF ON OFF ON OFF ON OFF ON
2 OFF OFF ON ON OFF OFF ON ON
3 OFFOFFOFFOFFONONONON
DS2
Switch No. Function OFF ON Factory Setting
1
Bit length
8 bits 7 bits OFF
2
Parity
No Yes ON
3
Parity conditions
Odd Even OFF
4 OFF
5
Baud rate
Seethetablebelow.
ON
Baud Rate (bps) Setting
Switch No. 1,200 2,400 4,800 9,600
4 OFF ON OFF ON
5OFF OFF ON ON
* DS2 setting isavailable only for Serial interface
International
Character
Setting