Filter
Top Products
— 35 —
7.3 Serial Interface Type
Switch No.
87 65
OFF OFF OFF OFF 4800 None O
OFF OFF OFF ON 1200 None —
OFF OFF ON OFF 2400 None —
OFF OFF ON ON 4800 None —
OFF ON OFF OFF 9600 None —
OFF ON OFF ON 19200 None —
OFF ON ON OFF 1200 Odd —
OFF ON ON ON 2400 Odd —
ON OFF OFF OFF 4800 Odd —
ON OFF OFF ON 9600 Odd —
ON OFF ON OFF 19200 Odd —
ON OFF ON ON 1200 Even —
ON ON OFF OFF 2400 Even —
ON ON OFF ON 4800 Even —
ON ON ON OFF 9600 Even —
ON ON ON ON 19200 Even —
Switch No. Function OFF ON Factory Setting
1 Character direction Normal Inverted OFF
2 (920)* CR command Ignore CR CR + LF OFF
2 (3110) CR command — — OFF
3 Reset in Disable Enable ON
4 Memory switch Disable Setting Enable Setting OFF
5 OFF
6 OFF
7 OFF
8 OFF
Baud Rate
(bps)
* Difference may occur in accordance with the emulation set by the memory switch.
Set DIP switch No. 4 to ON. Then turn the printer power on while pressing and holding
the FEED switch. The printer enters the manual memory switch setting mode. After
manual setting mode, be sure to set this switch to Off.
Baud rate and parity selection
Transmission rate
and parity
The following reference
Parity Factory Setting