Filter
Top Products
— 44 —
As the 40-column model is of half-dot printing system, continuous dots
cannot be arranged in the printing direction (lateral direction). Therefore,
even if any pattern is specified at point “*” at the right of point “●” above,
it cannot be registered as a pattern.
In case of CBM-920 emulation, when data is printed with print data arranged
on the 9th line, some effect may occur in the print pattern of the next print
character.
In case of CBM-920 emulation, registering two-character data and configuring
one double-width character is available.
<Example> When registering a Japanese character “ ” by using two
characters 41H and 42H
In iDP3110 emulation
321 654
1
2
3
4
5
6
7
0
1 2 3 4 5 6 77
41H 22H 55H 08H 41H 00H 41H
*
*
*
*
*
*
*
*
*
*
*
321 654 987 321 65
41H 42H
4 987
Following ESC + & + 01 (Note) + 41H + 42H
sending data 80H, 00H, 81H, 00H, 89H, 00H, 89H, 00H, FFH
00H, 89H, 00H, A9H, 40H, 81H, 00H, 80H, 00H
allows “
” to be registered at 41H and 42H.
[Printing registered character]
To print a registered character, executing Activate Registered Character
command may be required in some case. If you want to return to the internal
characters, it is necessary to disable the registered characters.