Filter
Top Products
Disassembly
2 - 12 Removing the System Memory (RAM)
2.Disassembly
Upgrading a Third System Memory (RAM) Module
If you wish to add a third memory module follow the procedure below (note the sidebar warning on RAM speeds).
1. Turn off the computer, and turn it over and remove the battery.
2. Turn the computer back over to access the keyboard.
3. Press the four keyboard latches - at the top of the keyboard to elevate the keyboard from its normal position
(you may need to use a small screwdriver or pair of tweezers to do this).
4. Lift the keyboard up, but be careful not to twist the keyboard ribbon cable .
5. Remove screws - and remove the keyboard plate .
Figure 8
Third RAM
Module Removal
a. Press the four latch-
es to release the
keyboard.
b. Lift the keyboard up.
c. Remove the screws
and keyboard plate.
RAM Module Speeds
Use either 1066MHz
OR 1333MHz DDRIII
(DDR3) modules of the
same brand. Do not mix
DRAM speeds/brands
in order to prevent un-
expected system be-
havior.
8. Keyboard Plate
•2 Screws
1 4
1
3
2
4
a.
5
6 7 8
5
6
7
b. c.
8