Clover Electronics LCD261616 Computer Monitor User Manual


 
5. Installation
21
1. REC Key
- Press this key to start recording.
- In order to stop recording, press this key again or click the REC button on the MENU window
and then the following message will be appeared. Click the OK button or press the ENTER
key.
2. TALK Key
- See section 6-7.4.2 for information.
3. EXIT Key
- Press this key to exit menu without saving.
4. ENTER Key
- Press this key to select items or save menu settings.
5. UP Key
- Used to increase Audio Volume for the system.
6. DOWN Key
- Used to decrease Audio Volume for the system.
7. Stand-by Power Mode Button
- Turn the LCD Panel (Screen) On or Off
- Even though the LCD Screen is turned off by pressing this button, the system will be
continued to work.
- See section 6-4 for more information.
8. POWER LED
- The red LED is lit when the Power switch on the rear of the system is ON.
9. Remote Control Signal Receiver
- Do not block the receiver port on the unit. Doing so may cause the remote controller to
function improperly.