Filter
Top Products
C002332_09_CR3 User Manual - 48
Save Settings
Scan the following codes to set appropriate keyboard mapping:
US English (Default) US English - Leading 0 US English - ctrl + char
No Leading 0
French German Japanese
Universal Keyboard Custom Keyboard
4.9 - Keyboard Support
Requests map to
be installed
CR3 has a battery-powered real time clock embedded in the reader. When enabled, the time stamp will be
a prefi x to the data. Time stamping continues until disabled. The time stamp will be shown in the following
format: YYYY-MM-DD HH:MM:SS
On Off (Default)
Note: Turning on the time stamp feature will cause the reader to re-start. Make sure previous settings
have been saved prior to scanning the code or you will lose unsaved settings.
4.10 - Time Stamp Settings
CR3 also has a separate time set feature for logging data (defaulted off in shipped units). If you enable the
time set feature, everytime the CR3 is powered off or rebooted, the timer will stop.
Scan the following codes to turn the time set on/off:
On Off (Default)
Note: The time set feature is in relative time from when the reader was last powered up.