Filter
Top Products
Compaq Confidential – Need to Know Required
Writer: Liz M. Weiman Project: Guide Title Comments:
Part Number: 122833-002 File Name: c-ch2 Installing.doc Last Saved On: 1/4/01 12:54 PM
Chapter
2
Installing the 64-Bit/66-MHz Fibre
Channel Host Adapter
The installation of the Compaq StorageWorks 64-Bit/66-MHz Fibre Channel
Host Adapter and its connection to Fibre Channel storage systems must be
completed in a step-by-step process. See Table 2-1 for installation steps.
Table 2-1
64-Bit/66-MHz Fibre Channel Host Adapter Installation Steps
Step Task Go to Chapter/Guide
1 Run System ROMPaq. See “Running System ROMPaq”
section in Chapter 2.
2 Install the 64-Bit/66-MHz Fibre
Channel Host Adapter in the server.
Refer to your server
documentation for specific
installation instructions.
3 Install the GigaBit Interface
Converter (GBIC) module.
See the “Hardware Installation”
section in Chapter 2.
4 Connect the Multi-Mode Fibre
Channel cable to the 64-Bit/66-MHz
Fibre Channel Host Adapter.
See the “Hardware Installation”
section in Chapter 2.
5 Run the RA4100 SAN Solution
Support Software CD or the Compaq
SmartStart and Support Software
CD to load the drivers.
See Chapters 3 through 8.