Filter
Top Products
Compaq Confidential – Need to Know Required
Writer: Liz M. Weiman Project: Compaq StorageWorks 64-Bit/66-MHz Fibre Channel Host Adapter Installation Guide Comments:
Part Number: 122833-002 File Name: i-ch8 Installing Drivers for UnixWare.doc Last Saved On: 3/6/01 10:01 AM
Chapter
8
Installing Drivers for SCO UnixWare
This chapter outlines the driver installation steps for the SCO UnixWare
operating system that supports the 64-Bit/66-MHz Fibre Channel Host
Adapter. The latest drivers and support files for SCO UnixWare can be
downloaded from the Compaq website at www.compaq.com.
Before installing the drivers, you must:
■
Update your system firmware by running System ROMPaq (see
Chapter 2).
■
Configure the hardware by running the System Configuration Utility.
Installing the Driver
Follow the instructions in this section to install the driver for a new
64-Bit/66-MHz Fibre Channel Host Adapter installation or to upgrade the
driver in an existing SCO UnixWare server with a 64-Bit/66-MHz Fibre
Channel Host Adapter.
The latest drivers and support files for SCO UnixWare, as well as information
about installing drivers, are located on the Compaq website at
www.compaq.com.
The drivers are also located on the latest version of the Compaq SmartStart
and Support Software CD. To access these files, you will need to create a set
of Compaq UnixWare Extended Feature Supplement (EFS) diskettes from the
SmartStart and Support Software CD.