Filter
Top Products
Installing Drivers for SCO UnixWare 8-3
Compaq Confidential – Need to Know Required
Writer: Liz M. Weiman Project: Compaq StorageWorks 64-Bit/66-MHz Fibre Channel Host Adapter Installation Guide Comments:
Part Number: 122833-002 File Name: i-ch8 Installing Drivers for UnixWare.doc Last Saved On: 3/6/01 10:01 AM
Booting to Single-User Mode
1. Start the server.
2. Bring the system up in the Single-User mode.
3. At the UnixWare Logo, press the space bar.
4. At the prompt, type the following and press Enter.
INITSTATE=1
5. At the prompt, type the following and press Enter.
go
6. At the login prompt, type the following and press Enter.
root
7. Type your password and press Enter.
8. At the root prompt, type the following:
# pkgadd –d diskette1
9. At the prompt, insert one of the Compaq EFS diskettes for UnixWare
into the diskette drive. The order of diskette insertion is not important.
10. Scroll through the list and select PTFCASA to install.
Accessing the Driver Installation Information
To access the driver installation information:
1. Place the diskette labeled Documentation Diskette in the diskette drive
of a server or computer. If you wish to print the information file, the
system must be connected to a printer.
2. Restart the system.
3. Select the file named CASA.TXT to view or print.
Follow the instructions in this file to install the 64-Bit/66-MHz Fibre Channel
Host Adapter driver in an existing UnixWare server.