Filter
Top Products
5–18 Maintenance and Service Guide
Removal and Replacement Procedures
5.8 Connector Cover
✎
Connector covers are available with carbon finish for Evo
Notebook N1005 models and silver finish for Presario 900
models, and are included in the Miscellaneous Plastics/Hardware
Kit, spare part number 285541-001.
1. Prepare the computer for disassembly (Section 5.3).
2. Turn the computer bottom side up with the rear panel facing
forward.
3. Remove the two TM2.5 × 5.0 screws
1
that secure the
connector cover to the base enclosure (Figure 5-15).
4. Open the connector cover
2
.
5. Remove the connector cover from the base enclosure
3
.
Figure 5-15. Removing the Connector Cover
Reverse the preceding procedures to install the connector cover.
272638-001.book Page 18 Thursday, July 25, 2002 4:21 PM