Filter
Top Products
2–10 Compaq iPAQ Microportable Projector MP4800 User’s Guide
Using the Projector
Adjusting the Projected Image
There are three ways to adjust the projected image:
■
Adjusting the projector height
■
Adjusting the image size
■
Adjusting the projector focus
Adjusting the Projector Height
The projector has a built-in elevator foot that can raise the
projector approximately 1 inch (2.54 cm).
Ä
CAUTION: If the projector is mounted to a tripod, do not use the
elevator foot.
To adjust the height:
1. Raise the projector to the desired display angle, then press the
elevator button
1
to release the elevator foot
2
.
2. To lower the display angle, press the elevator button again
and press down on the projector to lower it.
Ä
CAUTION: Failure to press the elevator button before adjusting the
elevator foot can result in damage to the elevator mechanism.
261794-001.bookPage10Tuesday,January22,20022:20PM