Filter
Top Products
4–8 Maintenance and Service Guide
Removal and replacement procedures
Hard drive
Before removing the hard drive:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first disconnecting the power cord from the AC outlet and then
disconnecting the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 4-7).
Remove the hard drive:
1. Position the computer with the front toward you.
2. Remove the two Phillips PM2.5×5.0 captive screws 1 that secure the hard drive cover to the computer.
3. Lift the left side 2 of the hard drive cover, swing it to the right, and remove the cover 3. The hard drive cover
is included in the Plastics Kit, spare part number 486862-001.
Description Spare part number
500 GB, 7200 rpm hard drive 575569-001
320 GB, 7200 rpm hard drive 575568-001
250 GB, 7200 rpm hard drive 575567-001
160 GB, 7200 rpm hard drive 580846-001
Hard Drive Hardware Kit (includes hard drive connector, hard drive bracket, and screws) 482158-001