Filter
Top Products
System board
NOTE: The system board spare part kit includes the processor and replacement thermal material.
Description Spare part number
For use on computer models equipped with an AMD E2-2000 processor (1.75-GHz, 1333-MHz,
18 W, dual core) and a UMA graphics subsystem memory
716019-501
For use on computer models equipped with an AMD E1-1500 processor (1.48-GHz, 1066-MHz,
18 W, dual core) and a UMA graphics subsystem memory
703563-501
For use on computer models equipped with an AMD E1-1200 processor (1.40-GHz, 1066-MHz,
18 W, dual core) and a UMA graphics subsystem memory
688303-501
Before removing the system board, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
Battery on page 35), and then remove the following components:
a.
Memory module/wireless module compartment cover (see
Memory module on page 36)
b. WLAN module (see
WLAN module on page 37)
c. Keyboard (see
Keyboard on page 39)
d. Optical drive (see
Optical drive on page 43)
e. Hard drive (see
Hard drive on page 45)
f. Top cover (see
Top cover on page 49)
When replacing the system board, be sure that the following components are removed from
the defective system board and installed on the replacement system board:
●
Memory module (see
Memory module on page 36)
●
RTC battery (see
RTC battery on page 48)
●
Fan/heat sink assembly (see
Fan/heat sink assembly on page 65)
62 Chapter 4 Removal and replacement procedures