Compaq Memory Channel Hub Switch User Manual


 
Installation
2–8
DIGITAL 2T-CCMHA-CB Central Office Memory Channel Hub Installation/Service Guide
5. Install a 10-32 standoff in the 2nd hole of the installation area on the left front rail.
Tighten this standoff.
6. Place the left rear slide bracket on the inside of the left rear rail and align the three
slide bracket holes and with the 1st, 2nd, and 3rd holes of the installation area on the
left rear rail.
7. Install three 10-32 truss-head screws in the 1st, 2nd, and 3rd, holes of the
installation area to secure the left rear slide bracket to the left rear rail, but do not
tighten.
8. Tighten the two 8-32 screws and nuts that secure the left rear slide bracket to the left
slide assembly.
9. Securely tighten all five 10-32 truss-head screws that secure the left slide assembly to
the left front and rear cabinet rails.
10. Install a 10-32 standoff in 14th hole of the installation area on the left front rail and
secure it in place with a 10-32 nut.