Filter
Top Products
Getting Started 13
Part Number: 216023-001 - Writer: Carey Gregg - Saved by: The Integrity Group
Pages: 18 Words: 2766 Saved date: 09/22/0010:37 AM File Name: Ch01.doc
Connecting the Projector to Other Video Sources
The optional Compaq Multimedia Adapter must be used to connect
the projector to a camcorder, DVD player, or videocassette
recorder. This adapter converts signals from the camcorder, DVD
player, or videocassette recorder for compatibility with the
projector.
Refer to Chapter 3, “Using the Compaq Multimedia Adapter,” for
information on attaching and using the Compaq Multimedia
Adapter.
Powering On the Projector
Follow these instructions to power on the projector:
1. Make sure the computer and projector power cords and the
signal cable are securely connected.
✎
Make sure the projector is perpendicular to
the projection screen.
2. Remove the lens cap by squeezing the tabs ➊ and pulling the
lens cap straight out ➋.
3. Press the blue Standby button ➌ on the top of the projector and
allow the projector to warm up for one to two minutes.
When the projector has warmed up, the Compaq startup screen
displays and the LED on the
Standby button turns green.