Filter
Top Products
Using the Projector 23
Part Number: 216023-001 - Writer: Carey Gregg - Saved by: The Integrity Group
Pages: 10 Words: 1921 Saved date: 09/22/0010:22 AM File Name: Ch02.doc
Symbol Control Function
Standby button
Powers the projector lamp on and
off. The Standby LED changes
color modes to indicate the
following operating modes:
1. Flashing amber indicates the
projector is going into standby
mode and cannot be restarted
until the LED glows amber
steadily.
2. All five LED buttons rapidly
flashing amber indicate the
lamp has overheated and the
projector has automaticall
y
shut
down.
Select button
1. Launches first, second, and
third-level on-screen menus.
2. Exits the on-screen menus.
−
Minus button
Selects and adjusts the on-screen
scroll down menu functions.
+
Plus button
Selects and adjusts the on-screen
scroll up menu functions.
R
Resync button
Automatically synchronizes the
projector to track the input source.
IMPORTANT: To use standby mode, press the Standby button
and, after a six to ten-second delay, the unit enters Standby mode
and the projector lamp turns off. A “Going to Standby” message
appears on the screen for the duration of the six to ten-second delay.
When the message disappears from the screen, there is a 45-second
delay before the lamp can be turned back on. Wait 45 seconds to
allow the lamp to cool before pressing the
Standby button again.