Filter
Top Products
Using the Projector 30
Part Number: 216023-001 - Writer: Carey Gregg - Saved by: The Integrity Group
Pages: 10 Words: 1921 Saved date: 09/22/0010:22 AM File Name: Ch02.doc
■ S-video, Use Source to Change Input—Indicates S-video with
other inputs are active. Press the
Source button to change the
setting.
■ HDTV, Use Source to Change Input—Indicates HDTV input is
connected along with other inputs. If HDTV is connected, HDTV
is the default setting. Press the
Source button to switch to video.
HDTV (Optional Use)
The Compaq Microportable Projector is capable of displaying
various High Definition TV display modes. The Multimedia
Adapter is not required to take advantage of this functionality.
A variety of sources can be used to provide HDTV data to the
projector for display. Some of these sources are:
■ Digital-VHS (D-VHS) player
■ HDTV-DVD player
■ Satellite Dish HDTV receiver
■ A variety of DTV tuners (to receive programming over the
airwaves)
Most of these sources will provide an analog component video
output, a standard VGA output, or a standard digital DVI output.
The color information can be either in YPrPb (default) format or
RGB format. The user can switch between these using the analog
on-screen menu adjustments by selecting “HDTV Setup.” Refer to
“Analog On-Screen Menu Adjustments” earlier in this chapter for
more information.
The projector is capable of processing HDTV data provided either
on the standard VGA connector or the DVI interface. Use the
Component HDTV to VGA cable that came with your projector to
convert component outputs to VGA format.
The following modes are supported on the DVI interface:
■ HD0
■ 640 x 480p
■ 704 x 480p
■ 1280 x 720p
■ HD1
■ 1920 x 1080i