Filter
Top Products
Optical drive
NOTE: All optical drive spare part kits include an optical drive bezel.
Description Spare part number
For use in computer models with Intel processors:
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive with LightScribe 482178-001
Bezel for DVD±RW and CD-RW Super Multi Double-Layer Combo Drive with LightScribe (includes
mounting hardware)
488212-001
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive 482176-001
Bezel for DVD±RW and CD-RW Super Multi Double-Layer Combo Drive (includes mounting
hardware)
488211-001
Blu-ray ROM DVD±R/RW SuperMulti DL Drive 482182-001
Bezel for Blu-ray ROM DVD±R/RW SuperMulti DL Drive (includes mounting hardware) 488213-001
For use in computer models with AMD processors:
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive with LightScribe 482178-002
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive 482176-002
Blu-ray ROM DVD±R/RW SuperMulti DL Drive 482182-002
Before removing the optical drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 43).
Remove the optical drive:
1. Position the computer with the right side toward you.
2. Remove the Phillips PM2.5×6.0 screw (1) that secures the optical drive to the computer.
3. Insert a thin tool, such as a paper clip (2), into the release access. (The optical drive media tray is
partially ejected from the optical drive.)
44 Chapter 4 Removal and replacement procedures