Filter
Top Products
System fan
Description Spare part number
System fan for use in computer models with Intel or AMD processors and UMA graphics subsystems 486844-001
Before removing the system fan, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 43).
5. Remove the following components:
a. Hard drive (see
Hard drive on page 46)
b. Optical drive (see
Optical drive on page 44)
c. Keyboard (see
Keyboard on page 56)
d. Switch cover (see
Switch cover on page 58)
e. Speaker assembly (see
Speaker assembly on page 60)
f. Display assembly (see
Display assembly on page 62)
g. Top cover (see
Top cover on page 69)
h. System board (see
System board on page 82)
Remove the system fan:
1. Position the base enclosure with the front toward you.
2. Remove the two black Phillips PM2.5×6.0 screws (1) that secure the system fan to the
computer.
90 Chapter 4 Removal and replacement procedures