Filter
Top Products
Display assembly
Description Spare part number
14.1-inch, WXGA, BrightView display assembly for use only in computer models with a camera
module (includes microphones)
486728-001
14.1-inch, WXGA, BrightView display assembly for use only in computer models without a camera
module (includes microphones)
486729-001
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 43).
5. Disconnect the wireless antenna cables from the WLAN module (see
WLAN module on page 49).
6. Remove the following components:
a. Keyboard (see
Keyboard on page 56)
b. Optical drive (see
Optical drive on page 44)
c. Switch cover (see
Switch cover on page 58)
Remove the display assembly:
1. Turn the computer display-side up, with the front toward you.
2. Open the display as far as possible.
3. Remove the wireless antenna cables (1) from the hole in the system board and the routing channels
built into the top cover.
62 Chapter 4 Removal and replacement procedures