Filter
Top Products
Conceptronic C300BRS4 User Manual
16
Configuring Router Settings
This chapter describes how to configure the Wireless Broadband Router the first time you use it or if
you are configuring it after resetting the device to the factory default settings. The following
sections describe how to configure the router through the Web based configuration.
The configuration of your C300BRS4 is web based. You will need a web browser for the configuration
of the device.
Note:
For configuration of the router it is advised to use a LAN Cable connection to the device
instead of a Wireless connection.
A. Start your web browser (like: Internet Explorer, FireFox or Safari).
B. Enter the IP address of the device in the address bar of your web browser (By default:
http://192.168.0.1/
).
The Login page of the C300BRS4 will be shown.
C. Enter the Username and Password (Default: ‘admin’ & ‘admin’) and click “Submit” to enter
the configuration pages.
When the Username and Password are correct the router will display the “Device Settings”
overview.
The “Device Settings” overview shows all configured settings for the LAN, WAN and Wireless part of
the router.
C
C