Filter
Top Products
Conceptronic C300BRS4 User Manual
3
Requirements for Installation
To install and use the Wireless Broadband Router you need a computer equipped with an Ethernet
port (such as an Ethernet NIC) and a web browser
.
WLAN Ethernet Adapter
Any computer that uses the Wireless Broadband Router must be able to connect to it through the
Wireless Ethernet (WLAN) on the Wireless Broadband Router. This connection is a Wireless Ethernet
(WLAN or WiFi) connection and therefore requires that your computer be equipped with a Wireless
Ethernet Adapter as well. Many notebook computers are now sold with a Wireless Ethernet Adapter
already installed. There is also a Wired Ethernet port that is used to connect the WLAN adapter to
your wired network. This port can be used to configure the Wireless Broadband Router. Most fully
assembled desktop computers come with an Ethernet NIC adapter as standard equipment. If your
computer does not have an Ethernet port, you must install an Ethernet NIC adapter before you can
configure the Wireless Broadband Router. If you must install an adapter, follow the installation
instructions that come with the Ethernet NIC adapter.
Operating System
The Wireless Broadband Router uses an HTML-based web interface for setup and management. The
web configuration manager may be accessed using any operating system capable of running web
browser software.
Web Browser
Any common web browser can be used to configure the Wireless Broadband Router using the web
configuration management software. The program is designed to work best with more recently
released browsers such as Microsoft Internet Explorer® version 6.0, Netscape Navigator® version
6.2.3, or later versions. The web browser must have JavaScript enabled. JavaScript is enabled by
default on many browsers. Make sure JavaScript has not been disabled by other software (such as
virus protection or web user security packages) that may be running on your computer.