Filter
Top Products
Conceptronic C300BRS4 User Manual
41
PPTP Parameters Description
IP Address Enter the IP address for your Router based on the information
provided to you by your ISP.
Subnet Mask Enter the Subnet Mask for your Router based on the information
provided to you by your ISP.
ISP Gateway Address Enter the Gateway IP address based on the information provided to
you by your ISP.
DNS Enter the Domain Name Server IP address.
Server IP Enter the IP address of the ISP server with which your router will be
conveying encrypted information. This field is based on information
provided to you by your ISP.
Username Enter the name of the PPTP account as provided to you by your ISP.
Password Enter the PPTP password as provided to you by your ISP.
Retype Password Retype the password entered in the Password field.
Maximum Idle Time A value of 0 means that the PPP connection will remain connected. If
your network account is billed according to the amount of time the
Router is actually connected to the Internet, enter an appropriate Idle
Time value (in minutes). This will disconnect the Router after the
WAN connection has been idle for the amount of time specified.
MTU The Maximum Transmission Unit size may be changed if you want to
optimize efficiency for uploading data through the WAN interface.
The default setting (1400 bytes) should be suitable for most users.
Some user may want to adjust the setting to optimize performance for
wireless traffic or when low latency is desired (such as with Internet
gaming). It is highly recommended that the user research how
adjusting the MTU may affect network traffic for better or worse.
Connect mode select Select the desired option: Always on, Manual, or Connect on demand.
Most users will want to choose the default connection setting, Always
on.