Filter
Top Products
Conceptronic C300BRS4 User Manual
34
4. Leave the MTU value at the default setting (default = 1500) unless you have specific reasons
to change this (see table below).
5. When you are satisfied that all the WAN settings are configured correctly, click on the Apply
button.
6. The new settings must be saved and the Router must be restarted for the settings to go into
effect. To save and reboot the Router, click on the Tools button in the top menu and select
the System button in the left menu. In the System Management window, click the Save
button under Save Settings to Local Hard Drive and then click the Reboot button to reboot the
C300BRS4.
7. The Router will save the new settings and restart. Upon restarting the Router will
automatically establish the WAN connection.
Additional settings for Static IP Address connections:
Static IP Parameters Description
IP Address This is the permanent global IP address for your account. This is the
address that is visible outside your private network. Get this from your
ISP.
Subnet Mask This is the Subnet mask for the WAN interface. Get this from your ISP.
ISP Gateway Address This is the IP address of your ISP’s Gateway router. It provides the
connection to the Router for IP routed traffic that is outside your ISP’s
network. That is, this will be the primary connection from the Router
to most of the Internet. Get this IP address from your ISP.
MAC Address To use the Clone MAC Address feature, enter a MAC address in this
field and then click the Clone MAC Address button.
Primary DNS Address This is the IP address of the first choice for Domain Name Service
(DNS) used to match the named URL web address used by most
browsers with the actual global IP address used for a web server.
Usually this will be a server owned by the ISP. Get this IP address from
your ISP.
Secondary DNS Address This is the second choice for a DNS server. Get this IP address from
your ISP.
MTU The Maximum Transmission Unit size may be changed if you want to
optimize efficiency for uploading data through the WAN interface. The
default setting (1500 bytes) should be suitable for most users. Some
user may want to adjust the setting to optimize performance for
wireless traffic or when low latency is desired (such as with Internet
gaming). It is highly recommended that the user research how
adjusting the MTU may affect network traffic for better or worse.