Filter
Top Products
7
2. Hardware Installation
• Unpack the print server package and verify that all the items listed in the section 1.2 are provided.
• Connect the print server to the printer you want to share on the network.
• Connect the print server to your network by attached the network cable to the UTP port of the print
server.
• Connect the power adapter to the print server. The print server will perform the Power-On-Self-Test
(POST) after it is powered on. During the POST, the Status and Ready LEDs will be on. When the LEDs
are unlighted, the print server is ready.
NOTE1: MUST use the power adapter shipped with the print server, do NOT use
any other power adapter from any sources.
NOTE2: To prevent the compatibility problem between print server and a few
printer, it is recommended that you power on the print server before the
printer.